AMERICAN WRITING INK CO. INC. -- RUBBER CEMENT  -- 8040-00-262-9040
<pre>=====================  Product Identification  =====================

Product ID:RUBBER CEMENT
MSDS Date:09/15/1992
FSC:8040
NIIN:00-262-9040
=== Responsible Party ===
Company Name:AMERICAN WRITING INK CO. INC.
Address:33 ENDICOTT STREET
City:NORWOOD
State:MA
ZIP:02062
Country:US
Info Phone Num:617-762-0026
Emergency Phone Num:617-762-0026
Preparer's Name:H LEVINSON
CAGE:82956
=== Contractor Identification ===
Company Name:AMERICAN INK AND OIL CORP
Address:33 ENDICOTT STREET
Box:City:NORWOOD
State:MA
ZIP:02062-3006
Country:US
Phone:781-762-0026 / FAX: 781-762-1617
CAGE:82956

=============  Composition/Information on Ingredients  =============

Ingred Name:HEPTANE
CAS:142-82-5
Fraction by Wt: 88-90%
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT, DIRECT CONTACT-BURNING &
    REDNESS. SKIN: IRRIT. PROLONGED/REPEATED EXPOSURE-REDNESS &
    BURNING, DRYING & CRACKING OF SKIN & DERMATITIS. INHAL: NOSE/THROAT
    IRRIT, NAUSEA & DIZZINESS. INGEST:	DIGESTIVE TRACT IRRIT, NERVOUS
    SYS DEPRESSN, UNCOORDINATION, IRREGULAR HEARTBEATS (ARRHYTHMIAS).
Medical Cond Aggravated by Exposure:PERSONS WITH ASTHMA-LIKE CONDITIONS
    MAY EXPERIENCE ADDITIONAL BREATHING DIFFICULTIES. ALSO PRE-EXISTING
    HEART DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING, WASH WITH MILD SOAP AND
    WATER. INHALATION: REMOVE VICTIM TO FRESH AIR. IF NOT BREATHING
    GIVE ARTIFICIAL RESPIRATION OTHERWISE ADMINISTER OXYGEN. INGESTION:
    DO NOT I NDUCE VOMITING OR GIVE ANYTHING BY MOUTH. SEEK MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:25.0F,-3.9C
Lower Limits:1.2
Upper Limits:7.5
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER (NOT BEST MEDIA, USE
    ONLY TO COOL)
Fire Fighting Procedures:USE WATER SPRAY IN MINIMIZING VAPOR & COOL
    CNTNR EXPOSED TO HEAT & FLAME. AVOID SPREAD OF BURNING LIQUID
    W/WATER. USE OF SCBA FOR FIRE FIGHTERS IF WARRANTED.
Unusual Fire/Explosion Hazard:FLASHBACK ALONG VAPOR TRAIL MAY OCCUR.
    MATERIAL IS EXTREMELY FLAMMABLE AND MAY BE IGNITED BY HEAT, SPARKS,
    FLAME, OR STATIC ELECTRICITY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL. VENTILATE AREA. REMOVE ALL
    SOURCES OF IGNITION AND HOT METAL SURFACES. KEEP OUT OF DRAINS,
    SEWERS, WATERWAYS. DO NOT FLUSH AREA WITH WATER. USE ABSORBENT PADS
    OR CLOTHS. IF STRONG VAPOR S, FOAM, CAN BE USED TO SUPPRESS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. KEEP
    PRODUCT AWAY FROM HEAT & SOURCES OF IGNITION. KEEP OUT OF DIRECT
    SUNLIGHT. KEEP CONTAINERS COOL & DRY.
Other Precautions:USE ONLY IN WELL VENTILATED AREA. AVOID SKIN CONTACT
    WITH LIQUID. AVOID INHALATION OF VAPORS. KEEP FROM REACH OF
    CHILDREN. GROUND ALL MACHINERY NEAR USAGE AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE SELF CONTAINED BREATHING APPARATUS IF VAPORS
    EXCEED TLV.
Ventilation:LOCAL EXHAUST: USE FOR CAPTURING FUMES AND VAPORS.
    MECHANICAL (GENERAL): PREFERRED.
Protective Gloves:CHEM RESISTANT FOR PROLONGED EXPOSURE
Eye Protection:GOGGLES OR FACE SHIELD IF PROLONGED USE.
Other Protective Equipment:NOT UNDER NORMAL USE UNLESS POSSIBLE SPILLS
    ANTICIPATED. THEN CHEMICAL RESISTANT APRON OR OTHER CLOTHING
    NEEDED.
Work Hygienic Practices:EYE WASH FOUNTAIN. WASH SKIN CONTACT AREAS WELL
    AFTER USE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:200 TO 209F
Melt/Freeze Pt:M.P/F.P Text:CHARS
Vapor Pres:76 @ 68F
Vapor Density:>1
Spec Gravity:0.73
Evaporation Rate &amp; Reference:4.2 (BU AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER VISCOUS LIQUID, SWEET AROMATIC

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES ALSO OXIDIZING AGENTS AND SELECTED AMINES.
Stability Condition to Avoid:CONTACT WITH ALL IGNITION SOURCES.
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
    STATE, AND FEDERAL REGULATIONS PERTAINING TO FLAMMABLE LIQUIDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.