SANFORD CORP -- SHARPIE FINE POINT PERMANENT MARKER, PURPLE  -- 7520-00N036241
<pre>=====================  Product Identification  =====================

Product ID:SHARPIE FINE POINT PERMANENT MARKER, PURPLE
MSDS Date:12/10/1992
FSC:7520
NIIN:00N036241
=== Responsible Party ===
Company Name:SANFORD CORP
Address:2740 WASHINGTON BLVD
City:BELLWOOD
State:IL
ZIP:60104
Country:US
Info Phone Num:708-547-6719
Emergency Phone Num:800-228-5635
CAGE:86874
=== Contractor Identification ===
Company Name:SANFORD CORPORATION
Address:2740 WASHINGTON BLVD.
Box:City:BELLWOOD
State:IL
ZIP:60104
Country:US
Phone:1-800-323-0749
CAGE:86874

=============  Composition/Information on Ingredients  =============

Ingred Name:BUTYL ALCOHOL; (N-BUTANOL)	(SARA 313) (CERCLA)
CAS:71-36-3
RTECS #:EO1400000
OSHA PEL:100 PPM
ACGIH TLV:50 PPM, S, C
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-PENTANONE, 4-HYDROXY-4-METHYL-;
    (4-HYDROXY-4-METHYL-2-PENTANONE); (DIACETONE ALCOHOL).
CAS:123-42-2
RTECS #:SA9100000
OSHA PEL:50 PPM
ACGIH TLV:50 PPM

Ingred Name:DYES
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENTS (CONSISTING OF INGS 3 - 5)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PROPYL ALCOHOL; (N-PROPANOL)
CAS:71-23-8
RTECS #:UH8225000
OSHA PEL:200 PPM
ACGIH TLV:200 PPM;250 STEL, S

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
    UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 15, PART
    1500. PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
    CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
    W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
    MD	. SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:84.0F,28.9C
Lower Limits:2.2%
Upper Limits:14%
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP W/ABSORBENT MATERIAL & DISCARD AS
    SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT SHAKE MARKER. KEEP CAP ON
    MARKER WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NONE UNDER NORMAL USE CONDITIONS.
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE UNDER NORMAL USE CONDITIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NOTE:PHYSICAL DATA & REACTIVITY DATA PERTAINS TO N-PROPANOL (ING 3).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:207F,97C
Vapor Pres:13 @ 20C
Vapor Density:2.07
Spec Gravity:0.8044 (H*2O=1)
Evaporation Rate &amp; Reference:1.3 (BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS MOBILE LIQUID W/MILD ALCOHOL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT AVAILABLE.
Stability Condition to Avoid:NOT AVAILABLE.
Hazardous Decomposition Products:NOT AVAILABLE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . DISCARD AS SOLID WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.